| Reg. Price: | $149.99
|
| Sale Price: | $139.99
|
| Save: | $10.00 |
 |
|
 |
Non-Flammable, Highly Concentrated Citrus Based Cleaner/Degreaser.
Details:
DESCRIPTION
CitraCrete is a powerful waterbased, nonflammable degreaser and cleaner for use on all surfaces that can be cleaned with water. CitraCrete contains no butyl solvents, chlorinated solvents, EDTA, NTA or other toxic substances. CitraCrete is used to clean metal parts, greasy surfaces of floors, counters, equipment and all industrial applications where a nonflammable degreaser and cleaner is required. Yellow in color, CitraCrete has a citrus like odor and is composed of biodegradable surfactants and citrus solvents.
BENEFITS
CitraCrete is nonflammable and noncombustible. It will not even burn when soaked onto rags or other absorbent material. Even using the product concentrated, it is still completely nonflammable. CitraCrete is the ultimate safety cleaner. It is non-corrosive to steel and will not attack aluminum at the standard 1:5 dilution. It is pH controlled and contains special corrosion inhibitors. CitraCrete is highly efficient and can be diluted up to 1:25 for light duty cleaning and will clean heavy greasy surfaces at 1:5 dilution. CitraCrete penetrates and removes grease and works much more efficiently that typical emulsifier degreasers. It penetrates through the greasy soil and breaks the bond at the surface. Thus the greasy film is lifted off completely, and the surface is left clean with no oily film remaining. Just apply, let it penetrate, and flush the surface clean.
APPLICATION INSTRUCTIONS
PREPARATION:
Sweep the area to be cleaned free of trash and debris. Protect all areas not to be cleaned. Mask off all adjacent surfaces with painter's tape or plastic duct tape. If needed, use a plastic or coated cardboard as a spray shield.
MIXING: Dilute Citra Crete according to application (up to 1:5 with water for heavy duty cleaning and degreasing applications, or up to 1:25 with water for light duty cleaning applications).
APPLICATION: Using a Polyethylene pump-up sprayer, apply Citra Crete a up to 250 square feet per gallon depending upon the porosity of the concrete substrate. Saturate the surface to be cleaned. A stiff bristle brush should be used to work-in and agitate any heavily soiled areas to help break the bond from the substrate. Flush the cleaned area with water. A commercial high PSI and GPM pressure washer is the recommended method of flushing the cleaned surface, however, a garden hose with high pressure spray head will work sufficient as well. Repeat process as necessary. For heavy stains still left in concrete, spot clean using Citra Crete un-diluted. Agitate and flush again to remove.
Although Citra Crete is a biodegradable non-hazardous product, it may still pose a threat to plant life. Please test prior to use in areas where this may be an issue.
PLEASE NOTE
: It is always recommended to test the product in a small, inconspicuous area (on the same concrete substrate) for desired results prior to application. Coverage rates may vary for all coatings and substrates depending on porosity, density, texture etc.